Ti Gr 7 / 3.7235
Due to the high palladium content, Titanium Grade 7 is very resistant to corrosion. Thus, for example, titanium grade 7 is resistant to salt water and is suitable for handling chlorides media. In addition, Titanium Grade 7 is resistant to erosion or impacts.
Request A Quote?
Product Details
Due to the high palladium content, Titanium Grade 7 is very resistant to corrosion. Thus, for example, titanium grade 7 is resistant to salt water and is suitable for handling chlorides media. In addition, Titanium Grade 7 is resistant to erosion or impacts.
Material Data Sheet
| Material Design action | 3.7235 |
| Material | Titanium Gr 7 |
| UNS | R52400 |
Main fields of application of Titanium Gr 7
Titanium Grade 7 is preferably used in chemical plants.
Chemical composition of Titanium Gr 7
| Ti | Pd | N | Fe | O | H | C |
| ca % | % | % | % | % | % | % |
| 99.3 | 0.12-0.2 | 0.05 | 0.25 | 0.18 | 0.013 | 0.06 |
Characteristics of Titanium Gr 7
| Temperature Range | Material for wet corrosion |
| Melting Range | 1670°C |
| Density | 4.51 g/cm³ |
| ISO-V notch impact toughness at -59°C | Across < 62 J/cm² |
| lengthwise < 83 J/cm² |
Filler metal (for welding with titanium Gr 7)
As filler material for titanium grade 7 bare wire of the same titanium group should be used
Delivery program
Sheets and Plates: 5 – 14 mm
With short delivery time:
plates or sheets, tubes, flanges, forged or die-cut rings and round blanks, elbows, T-fittings, reductions, screws, nuts or washers according to your request. According to your individual wishes, we are able to cut our material with our plasma- or water jet cutter. Our material is stocked in superformats of 2000x6000mm. Cut to size on request.
